Bootstrak Skip to main content

3. Specification – Technical Data

Streszczenie: Specyfikacja, część 2 – dane techniczne: warunki środowiskowe i dane ogólne (wstrząsy, wibracje, EMC, IP20, izolacja) oraz szczegółowa specyfikacja wejść i dane ogólne każdego z 16 modułów ST-1xxx (napięcia ON/OFF, prąd, opóźnienie, impedancja, filtr, zasilanie polowe, okablowanie, masa, wymiary).
EN: Specification, part 2: environmental and general specifications and detailed input/general data for each of the 16 ST-1xxx modules.

Dotyczy: moduły wejść cyfrowych CREVIS serii ST-1xxx systemu FnIO (4, 8 i 16 wejść; 5, 12/24, 48 Vdc oraz 110/220 Vac)
Źródło: dokumentacja producenta (CREVIS ST-1xxx Digital Input Modules User Manual); tabele przepisane z obrazów na tekst – opracowanie Multiprojekt

3.2 Environment Specification

Environmental Specifications

ItemSpecification
Operating Temperature-20 to 55 °C (discrete I/O); 0 to 55 °C (analog I/O)
Non-Operating Temperature-40 °C to 85 °C
Relative Humidity5%~90% non-condensing
Operating Altitude2000 m
MountingDIN rail

General Specifications

ItemSpecification
Shock Operating10 g
Shock Non-Operating30 g
Vibration/Shock resistanceDisplacement: 0.012 inch p-p from 10~57 Hz; acceleration: 2 G from 57~500 Hz; sweep rate: 1 octave per minute; axes to test: x, y, z; frequency sweeps per axis: 10
EMC resistance burst/ESDConforms to EN-61000-6-2
EMIConforms to EN-61000-6-4
Installation Pos. / Protect. ClassVariable / IP20
Product CertificationUL / cUL, CE
Network ConformanceNA-9111: ODVA Conformance Test Completion; NA-9122: PTO Conformance Test Completion; NA-9131: CLPA Conformance Test Completion
IsolationDC module (including analog module): terminal block to F.G 500 Vac/1 min; AC module: terminal block to F.G 1500 Vac/1 min; relay module: terminal block to F.G 2500 Vac/1 min

3.3 Specification

3.3.1 ST-1114

ST-1114 – specification

ItemSpecification
Input Specification
Inputs Per Module4 Points Sink Type
Indicators4 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage5 Vdc nominal; min. 2.4 Vdc ~ max. 5.5 Vdc
Min. OFF-state VoltageMax. 0.8 Vdc
ON-state CurrentMax. 4.5 mA / point @ 5.5 Vdc
Input Signal DelayOFF to ON: max. 0.5 ms; ON to OFF: max. 0.5 ms
Nominal Input ImpedanceTyp. 1.3 kΩ
Filtering TimeTyp. 1.5 ms
Common Type4 Points / 2COM (Single Common)
General Specification
Power DissipationMax. 35 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 5 Vdc nominal; voltage range: 4.5~5.5 Vdc
WiringI/O cable max. 2.0 mm² (AWG 14)
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.2 ST-111F

ST-111F – specification

ItemSpecification
Input Specification
Inputs Per Module16 Points Sink Type
Indicators16 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage5 Vdc nominal; min. 4.5 Vdc ~ max. 5.5 Vdc
Min. OFF-state VoltageMax. 0.8 Vdc
ON-state CurrentMax. 4.5 mA / point @ 5.5 Vdc
Input Signal DelayMax. 3.0 ms
Input ImpedanceTyp. 1 kΩ
Filtering TimeTyp. 1.5 ms
Common Type16 Points / 2COM
General Specification
Power DissipationMax. 45 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 5 Vdc nominal; voltage range: 4.5~5.5 Vdc; power dissipation: max. 70 mA @ 5 V
WiringConnector type, up to AWG22; module connector: HIF3BA-20D-2.54DSA
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.3 ST-1124

ST-1124 – specification

ItemSpecification
Input Specification
Inputs Per Module4 Points Source Type
Indicators4 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage5 Vdc nominal; min. 2.4 Vdc ~ max. 5.5 Vdc
Min. OFF-state VoltageMax. 0.8 Vdc
ON-state CurrentMax. 4.5 mA / point @ 5.5 Vdc
Input Signal DelayOFF to ON: max. 0.5 ms; ON to OFF: max. 0.5 ms
Nominal Input ImpedanceTyp. 1.3 kΩ
Filtering TimeTyp. 1.5 ms
Common Type4 Points / 2COM (Single Common)
General Specification
Power DissipationMax. 35 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 5 Vdc nominal; voltage range: 4.5~5.5 Vdc
WiringI/O cable max. 2.0 mm² (AWG 14)
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.4 ST-112F

ST-112F – specification

ItemSpecification
Input Specification
Inputs Per Module16 Points Source Type
Indicators16 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage5 Vdc nominal; min. 4.5 Vdc ~ max. 5.5 Vdc
Min. OFF-state VoltageMax. 0.8 Vdc
ON-state CurrentMax. 4.5 mA / point @ 5.5 Vdc
Input Signal DelayMax. 3.0 ms
Filtering TimeTyp. 1.5 ms
Common Type16 Points / 2COM
General Specification
Power DissipationMax. 45 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 5 Vdc nominal; voltage range: 4.5~5.5 Vdc; power dissipation: max. 70 mA @ 5 V
WiringConnector type, up to AWG22; module connector: HIF3BA-20D-2.54DSA
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.5 ST-1214

ST-1214 – specification

ItemSpecification
Input Specification
Inputs Per Module4 Points Sink Type
Indicators4 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage24 Vdc nominal; min. 10.2 Vdc ~ max. 28.8 Vdc
Min. OFF-state VoltageMax. 5 Vdc
ON-state CurrentMax. 6 mA / point @ 28.8 Vdc
Input Signal DelayOFF to ON: max. 3 ms; ON to OFF: max. 3 ms
Nominal Input ImpedanceTyp. 5.1 kΩ
Filtering TimeTyp. 1.5 ms
Common Type4 Points / 2COM (Single Common)
General Specification
Power DissipationMax. 35 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 24 Vdc nominal; voltage range: 11~28.8 Vdc
WiringI/O cable max. 2.0 mm² (AWG 14)
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.6 ST-1218

ST-1218 – specification

ItemSpecification
Input Specification
Inputs Per Module8 Points Sink Type
Indicators8 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage24 Vdc nominal; min. 10.2 Vdc ~ max. 28.8 Vdc
Min. OFF-state VoltageMax. 5 Vdc
ON-state CurrentMax. 6 mA / point @ 28.8 Vdc
Input Signal DelayOFF to ON: max. 3 ms; ON to OFF: max. 3 ms
Nominal Input ImpedanceTyp. 5.1 kΩ
Filtering TimeTyp. 1.5 ms
Common TypeExternal Common
General Specification
Power DissipationMax. 35 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 24 Vdc nominal; voltage range: 11~28.8 Vdc
WiringI/O cable max. 2.0 mm² (AWG 14)
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.7 ST-121F

ST-121F – specification

ItemSpecification
Input Specification
Inputs Per Module16 Points Sink Type
Indicators16 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage24 Vdc nominal; min. 10.2 Vdc ~ max. 28.8 Vdc
Min. OFF-state VoltageMax. 5 Vdc
ON-state CurrentMax. 6 mA / point @ 28.8 Vdc
Input Signal DelayOFF to ON: max. 3 ms; ON to OFF: max. 3 ms
Nominal Input ImpedanceTyp. 5.1 kΩ
Filtering TimeTyp. 1.5 ms
Common Type16 Points / 2COM
General Specification
Power DissipationMax. 45 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 24 Vdc nominal; voltage range: 11~28.8 Vdc; power dissipation: 5 mA @ 28.8 Vdc per point
WiringModule connector: HIF3BA-20D-2.54DSA
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.8 ST-1224

ST-1224 – specification

ItemSpecification
Input Specification
Inputs Per Module4 Points Source Type
Indicators4 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage24 Vdc nominal; min. 10.2 Vdc ~ max. 28.8 Vdc
Min. OFF-state VoltageMax. 5 Vdc
ON-state CurrentMax. 6 mA / point @ 28.8 Vdc
Input Signal DelayOFF to ON: max. 3 ms; ON to OFF: max. 3 ms
Nominal Input ImpedanceTyp. 5.1 kΩ
Common Type4 Points / 2COM (Single Common)
General Specification
Power DissipationMax. 35 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 24 Vdc nominal; voltage range: 11~28.8 Vdc
WiringI/O cable max. 2.0 mm² (AWG 14)
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.9 ST-1228

ST-1228 – specification

ItemSpecification
Input Specification
Inputs Per Module8 Points Source Type
Indicators8 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage24 Vdc nominal; min. 10.2 Vdc ~ max. 28.8 Vdc
Min. OFF-state VoltageMax. 5 Vdc
ON-state CurrentMax. 6 mA / point @ 28.8 Vdc
Input Signal DelayOFF to ON: max. 3 ms; ON to OFF: max. 3 ms
Nominal Input ImpedanceTyp. 5.1 kΩ
Filtering TimeTyp. 1.5 ms
Common TypeExternal Common
General Specification
Power DissipationMax. 35 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 24 Vdc nominal; voltage range: 11~28.8 Vdc
WiringI/O cable max. 2.0 mm² (AWG 14)
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.10 ST-122F

ST-122F – specification

ItemSpecification
Input Specification
Inputs Per Module16 Points Source Type
Indicators16 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage24 Vdc nominal; min. 10.2 Vdc ~ max. 28.8 Vdc
Min. OFF-state VoltageMax. 5 Vdc
ON-state CurrentMax. 6 mA / point @ 28.8 Vdc
Input Signal DelayOFF to ON: max. 3 ms; ON to OFF: max. 3 ms
Filtering TimeTyp. 1.5 ms
Common Type16 Points / 2COM
General Specification
Power DissipationMax. 45 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 24 Vdc nominal; voltage range: 11~28.8 Vdc; power dissipation: 5 mA @ 28.8 Vdc per point
WiringModule connector: HIF3BA-20D-2.54DSA
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.11 ST-1314

ST-1314 – specification

ItemSpecification
Input Specification
Inputs Per Module4 Points Sink Type
Indicators4 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage48 Vdc nominal; min. 34 Vdc ~ max. 60 Vdc
Min. OFF-state VoltageMax. 10 Vdc
ON-state CurrentMax. 4 mA / point @ 48 Vdc
Input Signal DelayOFF to ON: max. 3 ms; ON to OFF: max. 3 ms
Nominal Input ImpedanceTyp. 12 kΩ
Common Type4 Points / 2COM (Single Common)
General Specification
Power DissipationMax. 35 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 48 Vdc nominal; voltage range: 34~60 Vdc
WiringI/O cable max. 2.0 mm² (AWG 14)
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.12 ST-131F

ST-131F – specification

ItemSpecification
Input Specification
Inputs Per Module16 Points Sink Type
Indicators16 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage48 Vdc nominal; min. 34 Vdc ~ max. 60 Vdc
Min. OFF-state VoltageMax. 20 Vdc
ON-state CurrentMax. 2.5 mA / point @ 60 Vdc
Input Signal DelayOFF to ON: max. 3 ms; ON to OFF: max. 3 ms
Nominal Input ImpedanceTyp. 27 kΩ
Filtering TimeTyp. 1.5 ms
Common Type16 Points / 2COM
General Specification
Power DissipationMax. 45 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 48 Vdc nominal; voltage range: 34~60 Vdc; power dissipation: max. 45 mA @ 48 Vdc
WiringConnector type, up to AWG22; module connector: HIF3BA-20D-2.54DSA
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.13 ST-1324

ST-1324 – specification

ItemSpecification
Input Specification
Inputs Per Module4 Points Source Type
Indicators4 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage48 Vdc nominal; min. 34 Vdc ~ max. 60 Vdc
Min. OFF-state VoltageMax. 10 Vdc
ON-state CurrentMax. 4 mA / point @ 48 Vdc
Input Signal DelayOFF to ON: max. 3 ms; ON to OFF: max. 3 ms
Nominal Input ImpedanceTyp. 12 kΩ
Common Type4 Points / 2COM (Single Common)
General Specification
Power DissipationMax. 35 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 48 Vdc nominal; voltage range: 34~60 Vdc
WiringI/O cable max. 2.0 mm² (AWG 14)
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.14 ST-132F

ST-132F – specification

ItemSpecification
Input Specification
Inputs Per Module16 Points Source Type
Indicators16 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage48 Vdc nominal; min. 34 Vdc ~ max. 60 Vdc
Min. OFF-state VoltageMax. 20 Vdc
ON-state CurrentMax. 2.5 mA / point @ 60 Vdc
Input Signal DelayOFF to ON: max. 3 ms; ON to OFF: max. 3 ms
Nominal Input ImpedanceTyp. 27 kΩ
Filtering TimeTyp. 1.5 ms
Common Type16 Points / 2COM
General Specification
Power DissipationMax. 45 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 48 Vdc nominal; voltage range: 34~60 Vdc; power dissipation: max. 45 mA @ 48 Vdc
WiringConnector type, up to AWG22; module connector: HIF3BA-20D-2.54DSA
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.15 ST-1804

ST-1804 – specification

ItemSpecification
Input Specification
Inputs Per Module4 Points
Indicators4 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage110 Vac nominal; min. 85 Vac ~ max. 132 Vdc (sic – in the source; AC module)
Min. OFF-state VoltageMax. 60 Vac
ON-state CurrentMax. 8 mA / point @ 132 Vdc (sic)
Input Signal DelayOFF to ON: max. 10 ms; ON to OFF: max. 10 ms
Nominal Input ImpedanceTyp. 11 kΩ
Frequency Range47–63 Hz
Common Type4 Points / 2COM (Single Common)
General Specification
Power DissipationMax. 35 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 120 Vac nominal; voltage range: min. 85 Vac ~ max. 132 Vac
WiringI/O cable max. 2.0 mm² (AWG 14)
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

3.3.16 ST-1904

ST-1904 – specification

ItemSpecification
Input Specification
Inputs Per Module4 Points
Indicators4 Green Input States, 1 Green/Red FnBUS State
ON-state Voltage220 Vac nominal; min. 170 Vac ~ max. 264 Vdc (sic – in the source; AC module)
Min. OFF-state VoltageMax. 130 Vac
ON-state CurrentMax. 12 mA / point @ 264 Vdc (sic)
Input Signal DelayOFF to ON: max. 10 ms; ON to OFF: max. 10 ms
Nominal Input ImpedanceTyp. 22 kΩ
Frequency Range47–63 Hz
Common Type4 Points / 2COM (Single Common)
General Specification
Power DissipationMax. 35 mA @ 5.0 Vdc
IsolationI/O to Logic: photocoupler isolation
Field PowerSupply voltage: 240 Vac nominal; voltage range: min. 170 Vac ~ max. 264 Vac
WiringI/O cable max. 2.0 mm² (AWG 14)
Weight70 g
Module Size12 mm x 99 mm x 70 mm
Environment ConditionRefer to Environment Specification

Słowa kluczowe

specyfikacja techniczna, napięcie ON, napięcie OFF, prąd wejściowy, opóźnienie sygnału, impedancja wejściowa, filtr, field power, temperatura pracy, IP20, izolacja, HIF3BA-20D-2.54DSA