Bootstrak Skip to main content

7. Device Connection

Streszczenie: Podłączenie czytnika ID2000 do klienta IDMVS: instalacja oprogramowania, wyłączenie zapory, ustawienie sieci komputera, sprawdzenie sterownika USB, zmiana adresu IP, połączenie oraz opcje Preventing Illegal Occupation i Force IP.
EN: Connecting the ID2000 to the IDMVS client: software installation, firewall, PC network, USB driver check, modifying the IP, connecting, Preventing Illegal Occupation and Force IP.

Dotyczy: przemysłowy czytnik kodów Hikrobot serii ID2000 (typy I–VII; Fast Ethernet, USB lub RS-232; obsługa przez klienta IDMVS i kody konfiguracyjne)
Źródło: dokumentacja producenta (Hikrobot ID2000 Series Industrial Code Reader User Manual); opisy rysunków – opracowanie Multiprojekt

Device connection to the client software is required for device’s configuration and remote operations. This section introduces how to install the client software, set PC and device network, connect the device to the client software, etc.

7.1 Install Client Software

IDMVS is a client software for device configuration and remote operations.

Note:

  • The client software is compatible with 32/64-bit Windows XP/7/10.
  • You can get the client software installation package from https://en.hikrobotics.com/. It is recommended to use the latest version of the client software.
  • The graphic user interface may differ by different versions of client software you use.

Steps

image.png

1.

  1. Double click the installation package to start installing the client software.
    2.
  2. Select the language.
    3.
  3. Read and check Terms of the License Agreement.
    4.
  4. Click Start Setup.
    5.
  5. Select installation directory and click Next.

image.pngIDMVS installer start screen with Start Setup button

Figure 7-1 Installation Interface

6.Figure description (text version): Installer window: language selection (English) at top right, Start Setup button in the middle and the "I accept Terms of the License Agreement" check box at the bottom.

  1. Finish the installation according to the interface prompts.

 

7.2 Set PC Environment

To ensure stable client running and data transmission, you are recommended to set PC environment. For the device with fast Ethernet data interface, you need to turn off the firewall and set PC network. For the device with USB data interface, you need to check the USB drive on the PC.

7.2.1 Turn offOff Firewall for Network Device

Note:
 For different Windows versions, the path name or interface may differ. Please refer to the actual condition.

Steps 

image.png

1.

  1. Go to Windows Firewall.
    ●
    • Windows XP system: Click Start → Control Panel → Security Center → Windows Firewall.
      ●
    • Windows 7 system: Click Start → Control Panel → Windows Firewall.
      ●
    • Windows 10 system: Click Start → Control Panel → System and Security → Windows Defender Firewall.
      2.
  2. Click Turn Windows Defender Firewall on or off on the left.
    3.
  3. Select Turn off Windows Defender Firewall (not recommended).

image.pngWindows Defender Firewall settings with firewall turned off

Figure 7-2 Windows Defender Firewall

4.Figure description (text version): Firewall settings: "Turn on Windows Defender Firewall" (with options to block all incoming connections and to notify when a new app is blocked) and the selected option "Turn off Windows Defender Firewall (not recommended)".

  1. Click OK.

7.2.2 Set PC Network for Network Device

To ensure stable data transmission and normal communication between the PC and the device via client software, you need to set the PC network and make sure that they are in the same network segment.

StepsNote:
For different Windows versions, the specific setting path and interface may differ. Please refer to the actual condition.

image.pngSteps

1.

  1. Go to PC network settings page: Start → Control Panel → Network and Internet → Network and Sharing Center → Change adapter settings.
    2.
  2. Select NIC and set the IP obtainment mode.
    ●
    • Select Obtain an IP address automatically to get an IP address of the PC automatically.
      ●
    • Or select Use the following IP address to set an IP address for the PC manually.

image.pngWindows IPv4 properties dialog with IP obtainment options

Figure 7-3 Set PC Network

Figure description (text version): Internet Protocol Version 4 (TCP/IPv4) Properties dialog, General tab: options "Obtain an IP address automatically" (selected) and "Use the following IP address" (IP address, subnet mask, default gateway), DNS server options, OK and Cancel buttons.

7.2.3 Check USB Drive for USB Device

Checking the USB drive on the PC is required before using the USB device. After connecting the USB device to the PC, the Windows system will automatically detect a new hardware device and install its corresponding drive.

Go to Device Manager by either pressing Win+X or right-clicking on the Windows menu button, and locate and expand the Network adapters to check the drive.

image.png

 

Note:

  • You can use the drive management tool to reinstall the USB drive if the installation failed.
  • You can search the device with USB data interface in GigE of Device Connection.
  • For the type VI device, you need to execute the “remote NDIS compatible device” operation when updating firmware. Contact the technical support if necessary.

7.3 Set Device Network and Connect to Client Software

You can set and operate the device in the client software only when the device is in the same network segment with the PC where the client software is installed.

Steps
1.

  1. Double click the client software to run it.
    2.
  2. Click image.pngRefresh icon to find the device.
    3.
  3. Right click the device to be connected, and click Modify IP.
    4.
  4. Set the IP address of the device in the same network segment with the PC, and click OK.

image.pngModify IP Address dialog (Static IP, DHCP, LLA)

Figure 7-4 Modify IP Address

5.Figure description (text version): Modify IP Address dialog showing the reachable range 10.64.58.1 – 10.64.58.254, the Static IP option (selected) with IP address, Subnet Mask and Default GateWay fields, DHCP and LLA options, OK and Cancel buttons.

  1. Double click the device in device list or click the connect icon to connect it to the client software.
    6.
  2. (Optional) Go to Device Control and enable Preventing Illegal Occupation to prevent IP address being occupied by other devices.
    7.
  3. (Optional) Go to Device Control and enable Force IP Enable if you want to edit static IP address.

image.pngDevice Control: Prevent Illegal Occupation and Force IP Enable

Figure 7-5 Preventing Illegal Occupation and Force IP Enable

Figure description (text version): Device control parameters: Prevent Illegal Occupation (off), Device Reset (Execute button), Auto Work (on), Force IP Enable (on).

Słowa kluczowe

Hikrobot ID2000, IDMVS, client software, install, firewall, PC network, USB driver, NDIS, Modify IP, static IP, DHCP, LLA, Force IP, Preventing Illegal Occupation, połączenie