Bootstrak Skip to main content

4. Mechanical Setup

Streszczenie: Montaż mechaniczny: maksymalnie 12 modułów rozszerzeń (do 159 mm długości), zakładanie i zdejmowanie modułów FnIO z szyny DIN za pomocą dźwigni blokującej oraz obowiązek wyłączenia zasilania przed pracami.
EN: Mechanical setup: total expansion, plugging and removal of FnIO modules with the locking lever.

Dotyczy: adapter sieciowy CREVIS NA-9473 (MODBUS RTU/ASCII, RS-485) systemu FnIO z modułami rozszerzeń serii ST
Źródło: dokumentacja producenta (CREVIS NA-9473 MODBUS Adapter (RS-485) User Manual); opisy rysunków – opracowanie Multiprojekt

4.1 Total Expansion

The number of the module assembly that can be connected is 12. So the maximum length is 159mm Exception. ST-2748 is excepted to calculate maximum length because that is double width module.

4.2 Plugging and Removal of the Components

Photo: FnIO modules on DIN rail – locking lever lock/unlock

Image description (text version): Photo of an FnIO station (adapter with expansion modules) on a DIN rail. Arrows at the blue locking lever at the bottom of a module show the two directions: turn toward the module to lock it on the rail, turn outward (unfold) to unlock it before removal.

As above figure in order to safeguard the FnIO module from jamming, it should be fixed onto the DIN rail with locking level. To do so, fold on the upper of the locking lever.

To pull out the FnIO module, unfold the locking lever as below figure.

DANGER
Before work is done on the components, the voltage supply must be turned off.

Słowa kluczowe

montaż, szyna DIN, dźwignia blokująca, moduły rozszerzeń, FnIO, demontaż