3. Specification – Technical Data
Streszczenie: Specyfikacja, część 2 – dane techniczne: warunki środowiskowe i dane ogólne (wstrząsy, wibracje, EMC, IP20, izolacja) oraz szczegółowa specyfikacja wejść i dane ogólne każdego z 16 modułów ST-1xxx (napięcia ON/OFF, prąd, opóźnienie, impedancja, filtr, zasilanie polowe, okablowanie, masa, wymiary).
EN: Specification, part 2: environmental and general specifications and detailed input/general data for each of the 16 ST-1xxx modules.
Dotyczy: moduły wejść cyfrowych CREVIS serii ST-1xxx systemu FnIO (4, 8 i 16 wejść; 5, 12/24, 48 Vdc oraz 110/220 Vac)
Źródło: dokumentacja producenta (CREVIS ST-1xxx Digital Input Modules User Manual); tabele przepisane z obrazów na tekst – opracowanie Multiprojekt
Rozdział 3 „Specification” podzielono na 2 strony: Interfaces and Wiring · Technical Data.
3.2 Environment Specification
Environmental Specifications
| Item | Specification |
|---|---|
| Operating Temperature | -20 to 55 °C (discrete I/O); 0 to 55 °C (analog I/O) |
| Non-Operating Temperature | -40 °C to 85 °C |
| Relative Humidity | 5%~90% non-condensing |
| Operating Altitude | 2000 m |
| Mounting | DIN rail |
General Specifications
| Item | Specification |
|---|---|
| Shock Operating | 10 g |
| Shock Non-Operating | 30 g |
| Vibration/Shock resistance | Displacement: 0.012 inch p-p from 10~57 Hz; acceleration: 2 G from 57~500 Hz; sweep rate: 1 octave per minute; axes to test: x, y, z; frequency sweeps per axis: 10 |
| EMC resistance burst/ESD | Conforms to EN-61000-6-2 |
| EMI | Conforms to EN-61000-6-4 |
| Installation Pos. / Protect. Class | Variable / IP20 |
| Product Certification | UL / cUL, CE |
| Network Conformance | NA-9111: ODVA Conformance Test Completion; NA-9122: PTO Conformance Test Completion; NA-9131: CLPA Conformance Test Completion |
| Isolation | DC module (including analog module): terminal block to F.G 500 Vac/1 min; AC module: terminal block to F.G 1500 Vac/1 min; relay module: terminal block to F.G 2500 Vac/1 min |
3.3 Specification
3.3.1 ST-1114
ST-1114 – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 4 Points Sink Type |
| Indicators | 4 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 5 Vdc nominal; min. 2.4 Vdc ~ max. 5.5 Vdc |
| Min. OFF-state Voltage | Max. 0.8 Vdc |
| ON-state Current | Max. 4.5 mA / point @ 5.5 Vdc |
| Input Signal Delay | OFF to ON: max. 0.5 ms; ON to OFF: max. 0.5 ms |
| Nominal Input Impedance | Typ. 1.3 kΩ |
| Filtering Time | Typ. 1.5 ms |
| Common Type | 4 Points / 2COM (Single Common) |
| General Specification | |
| Power Dissipation | Max. 35 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 5 Vdc nominal; voltage range: 4.5~5.5 Vdc |
| Wiring | I/O cable max. 2.0 mm² (AWG 14) |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.2 ST-111F
ST-111F – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 16 Points Sink Type |
| Indicators | 16 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 5 Vdc nominal; min. 4.5 Vdc ~ max. 5.5 Vdc |
| Min. OFF-state Voltage | Max. 0.8 Vdc |
| ON-state Current | Max. 4.5 mA / point @ 5.5 Vdc |
| Input Signal Delay | Max. 3.0 ms |
| Input Impedance | Typ. 1 kΩ |
| Filtering Time | Typ. 1.5 ms |
| Common Type | 16 Points / 2COM |
| General Specification | |
| Power Dissipation | Max. 45 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 5 Vdc nominal; voltage range: 4.5~5.5 Vdc; power dissipation: max. 70 mA @ 5 V |
| Wiring | Connector type, up to AWG22; module connector: HIF3BA-20D-2.54DSA |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.3 ST-1124
ST-1124 – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 4 Points Source Type |
| Indicators | 4 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 5 Vdc nominal; min. 2.4 Vdc ~ max. 5.5 Vdc |
| Min. OFF-state Voltage | Max. 0.8 Vdc |
| ON-state Current | Max. 4.5 mA / point @ 5.5 Vdc |
| Input Signal Delay | OFF to ON: max. 0.5 ms; ON to OFF: max. 0.5 ms |
| Nominal Input Impedance | Typ. 1.3 kΩ |
| Filtering Time | Typ. 1.5 ms |
| Common Type | 4 Points / 2COM (Single Common) |
| General Specification | |
| Power Dissipation | Max. 35 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 5 Vdc nominal; voltage range: 4.5~5.5 Vdc |
| Wiring | I/O cable max. 2.0 mm² (AWG 14) |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.4 ST-112F
ST-112F – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 16 Points Source Type |
| Indicators | 16 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 5 Vdc nominal; min. 4.5 Vdc ~ max. 5.5 Vdc |
| Min. OFF-state Voltage | Max. 0.8 Vdc |
| ON-state Current | Max. 4.5 mA / point @ 5.5 Vdc |
| Input Signal Delay | Max. 3.0 ms |
| Filtering Time | Typ. 1.5 ms |
| Common Type | 16 Points / 2COM |
| General Specification | |
| Power Dissipation | Max. 45 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 5 Vdc nominal; voltage range: 4.5~5.5 Vdc; power dissipation: max. 70 mA @ 5 V |
| Wiring | Connector type, up to AWG22; module connector: HIF3BA-20D-2.54DSA |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.5 ST-1214
ST-1214 – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 4 Points Sink Type |
| Indicators | 4 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 24 Vdc nominal; min. 10.2 Vdc ~ max. 28.8 Vdc |
| Min. OFF-state Voltage | Max. 5 Vdc |
| ON-state Current | Max. 6 mA / point @ 28.8 Vdc |
| Input Signal Delay | OFF to ON: max. 3 ms; ON to OFF: max. 3 ms |
| Nominal Input Impedance | Typ. 5.1 kΩ |
| Filtering Time | Typ. 1.5 ms |
| Common Type | 4 Points / 2COM (Single Common) |
| General Specification | |
| Power Dissipation | Max. 35 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 24 Vdc nominal; voltage range: 11~28.8 Vdc |
| Wiring | I/O cable max. 2.0 mm² (AWG 14) |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.6 ST-1218
ST-1218 – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 8 Points Sink Type |
| Indicators | 8 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 24 Vdc nominal; min. 10.2 Vdc ~ max. 28.8 Vdc |
| Min. OFF-state Voltage | Max. 5 Vdc |
| ON-state Current | Max. 6 mA / point @ 28.8 Vdc |
| Input Signal Delay | OFF to ON: max. 3 ms; ON to OFF: max. 3 ms |
| Nominal Input Impedance | Typ. 5.1 kΩ |
| Filtering Time | Typ. 1.5 ms |
| Common Type | External Common |
| General Specification | |
| Power Dissipation | Max. 35 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 24 Vdc nominal; voltage range: 11~28.8 Vdc |
| Wiring | I/O cable max. 2.0 mm² (AWG 14) |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.7 ST-121F
ST-121F – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 16 Points Sink Type |
| Indicators | 16 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 24 Vdc nominal; min. 10.2 Vdc ~ max. 28.8 Vdc |
| Min. OFF-state Voltage | Max. 5 Vdc |
| ON-state Current | Max. 6 mA / point @ 28.8 Vdc |
| Input Signal Delay | OFF to ON: max. 3 ms; ON to OFF: max. 3 ms |
| Nominal Input Impedance | Typ. 5.1 kΩ |
| Filtering Time | Typ. 1.5 ms |
| Common Type | 16 Points / 2COM |
| General Specification | |
| Power Dissipation | Max. 45 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 24 Vdc nominal; voltage range: 11~28.8 Vdc; power dissipation: 5 mA @ 28.8 Vdc per point |
| Wiring | Module connector: HIF3BA-20D-2.54DSA |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.8 ST-1224
ST-1224 – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 4 Points Source Type |
| Indicators | 4 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 24 Vdc nominal; min. 10.2 Vdc ~ max. 28.8 Vdc |
| Min. OFF-state Voltage | Max. 5 Vdc |
| ON-state Current | Max. 6 mA / point @ 28.8 Vdc |
| Input Signal Delay | OFF to ON: max. 3 ms; ON to OFF: max. 3 ms |
| Nominal Input Impedance | Typ. 5.1 kΩ |
| Common Type | 4 Points / 2COM (Single Common) |
| General Specification | |
| Power Dissipation | Max. 35 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 24 Vdc nominal; voltage range: 11~28.8 Vdc |
| Wiring | I/O cable max. 2.0 mm² (AWG 14) |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.9 ST-1228
ST-1228 – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 8 Points Source Type |
| Indicators | 8 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 24 Vdc nominal; min. 10.2 Vdc ~ max. 28.8 Vdc |
| Min. OFF-state Voltage | Max. 5 Vdc |
| ON-state Current | Max. 6 mA / point @ 28.8 Vdc |
| Input Signal Delay | OFF to ON: max. 3 ms; ON to OFF: max. 3 ms |
| Nominal Input Impedance | Typ. 5.1 kΩ |
| Filtering Time | Typ. 1.5 ms |
| Common Type | External Common |
| General Specification | |
| Power Dissipation | Max. 35 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 24 Vdc nominal; voltage range: 11~28.8 Vdc |
| Wiring | I/O cable max. 2.0 mm² (AWG 14) |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.10 ST-122F
ST-122F – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 16 Points Source Type |
| Indicators | 16 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 24 Vdc nominal; min. 10.2 Vdc ~ max. 28.8 Vdc |
| Min. OFF-state Voltage | Max. 5 Vdc |
| ON-state Current | Max. 6 mA / point @ 28.8 Vdc |
| Input Signal Delay | OFF to ON: max. 3 ms; ON to OFF: max. 3 ms |
| Filtering Time | Typ. 1.5 ms |
| Common Type | 16 Points / 2COM |
| General Specification | |
| Power Dissipation | Max. 45 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 24 Vdc nominal; voltage range: 11~28.8 Vdc; power dissipation: 5 mA @ 28.8 Vdc per point |
| Wiring | Module connector: HIF3BA-20D-2.54DSA |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.11 ST-1314
ST-1314 – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 4 Points Sink Type |
| Indicators | 4 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 48 Vdc nominal; min. 34 Vdc ~ max. 60 Vdc |
| Min. OFF-state Voltage | Max. 10 Vdc |
| ON-state Current | Max. 4 mA / point @ 48 Vdc |
| Input Signal Delay | OFF to ON: max. 3 ms; ON to OFF: max. 3 ms |
| Nominal Input Impedance | Typ. 12 kΩ |
| Common Type | 4 Points / 2COM (Single Common) |
| General Specification | |
| Power Dissipation | Max. 35 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 48 Vdc nominal; voltage range: 34~60 Vdc |
| Wiring | I/O cable max. 2.0 mm² (AWG 14) |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.12 ST-131F
ST-131F – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 16 Points Sink Type |
| Indicators | 16 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 48 Vdc nominal; min. 34 Vdc ~ max. 60 Vdc |
| Min. OFF-state Voltage | Max. 20 Vdc |
| ON-state Current | Max. 2.5 mA / point @ 60 Vdc |
| Input Signal Delay | OFF to ON: max. 3 ms; ON to OFF: max. 3 ms |
| Nominal Input Impedance | Typ. 27 kΩ |
| Filtering Time | Typ. 1.5 ms |
| Common Type | 16 Points / 2COM |
| General Specification | |
| Power Dissipation | Max. 45 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 48 Vdc nominal; voltage range: 34~60 Vdc; power dissipation: max. 45 mA @ 48 Vdc |
| Wiring | Connector type, up to AWG22; module connector: HIF3BA-20D-2.54DSA |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.13 ST-1324
ST-1324 – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 4 Points Source Type |
| Indicators | 4 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 48 Vdc nominal; min. 34 Vdc ~ max. 60 Vdc |
| Min. OFF-state Voltage | Max. 10 Vdc |
| ON-state Current | Max. 4 mA / point @ 48 Vdc |
| Input Signal Delay | OFF to ON: max. 3 ms; ON to OFF: max. 3 ms |
| Nominal Input Impedance | Typ. 12 kΩ |
| Common Type | 4 Points / 2COM (Single Common) |
| General Specification | |
| Power Dissipation | Max. 35 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 48 Vdc nominal; voltage range: 34~60 Vdc |
| Wiring | I/O cable max. 2.0 mm² (AWG 14) |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.14 ST-132F
ST-132F – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 16 Points Source Type |
| Indicators | 16 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 48 Vdc nominal; min. 34 Vdc ~ max. 60 Vdc |
| Min. OFF-state Voltage | Max. 20 Vdc |
| ON-state Current | Max. 2.5 mA / point @ 60 Vdc |
| Input Signal Delay | OFF to ON: max. 3 ms; ON to OFF: max. 3 ms |
| Nominal Input Impedance | Typ. 27 kΩ |
| Filtering Time | Typ. 1.5 ms |
| Common Type | 16 Points / 2COM |
| General Specification | |
| Power Dissipation | Max. 45 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 48 Vdc nominal; voltage range: 34~60 Vdc; power dissipation: max. 45 mA @ 48 Vdc |
| Wiring | Connector type, up to AWG22; module connector: HIF3BA-20D-2.54DSA |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.15 ST-1804
ST-1804 – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 4 Points |
| Indicators | 4 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 110 Vac nominal; min. 85 Vac ~ max. 132 Vdc (sic – in the source; AC module) |
| Min. OFF-state Voltage | Max. 60 Vac |
| ON-state Current | Max. 8 mA / point @ 132 Vdc (sic) |
| Input Signal Delay | OFF to ON: max. 10 ms; ON to OFF: max. 10 ms |
| Nominal Input Impedance | Typ. 11 kΩ |
| Frequency Range | 47–63 Hz |
| Common Type | 4 Points / 2COM (Single Common) |
| General Specification | |
| Power Dissipation | Max. 35 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 120 Vac nominal; voltage range: min. 85 Vac ~ max. 132 Vac |
| Wiring | I/O cable max. 2.0 mm² (AWG 14) |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
3.3.16 ST-1904
ST-1904 – specification
| Item | Specification |
|---|---|
| Input Specification | |
| Inputs Per Module | 4 Points |
| Indicators | 4 Green Input States, 1 Green/Red FnBUS State |
| ON-state Voltage | 220 Vac nominal; min. 170 Vac ~ max. 264 Vdc (sic – in the source; AC module) |
| Min. OFF-state Voltage | Max. 130 Vac |
| ON-state Current | Max. 12 mA / point @ 264 Vdc (sic) |
| Input Signal Delay | OFF to ON: max. 10 ms; ON to OFF: max. 10 ms |
| Nominal Input Impedance | Typ. 22 kΩ |
| Frequency Range | 47–63 Hz |
| Common Type | 4 Points / 2COM (Single Common) |
| General Specification | |
| Power Dissipation | Max. 35 mA @ 5.0 Vdc |
| Isolation | I/O to Logic: photocoupler isolation |
| Field Power | Supply voltage: 240 Vac nominal; voltage range: min. 170 Vac ~ max. 264 Vac |
| Wiring | I/O cable max. 2.0 mm² (AWG 14) |
| Weight | 70 g |
| Module Size | 12 mm x 99 mm x 70 mm |
| Environment Condition | Refer to Environment Specification |
Słowa kluczowe
specyfikacja techniczna, napięcie ON, napięcie OFF, prąd wejściowy, opóźnienie sygnału, impedancja wejściowa, filtr, field power, temperatura pracy, IP20, izolacja, HIF3BA-20D-2.54DSA