1. Appearance
Streszczenie: Wygląd czytnika kodów ID5000 (typ I, typ II z większą osłoną i oświetleniem, typ III bez własnego oświetlenia, z obiektywem C-mount) oraz opis elementów: osłona obiektywu, otwory montażowe, źródło światła, złącze Gigabit Ethernet, złącze 12-pin i wskaźniki PWR, LNK, ACT, U1/U2.
EN: ID5000 code reader appearance (Type I, Type II, Type III without own light source) and component description: lens cap, screw holes, light source, Gigabit Ethernet interface, 12-pin interface and PWR, LNK, ACT, U1/U2 indicators.
Dotyczy: przemysłowy czytnik kodów Hikrobot serii ID5000 (złącze M12 12-pin, Gigabit Ethernet, RS-232; obsługa przez klienta IDMVS)
Źródło: dokumentacja producenta (Hikrobot ID5000 Series Industrial Code Reader User Manual, V2.5.0); tabele i uwagi przepisane z obrazów na tekst; opisy rysunków – opracowanie Multiprojekt
Note: Appearance here is for reference only. Refer to the device’s specification for detailed dimension information.
Device Views
Figure 1-1 Appearance (Type I)
Figure description (text version): Technical drawing in four views (front, side, rear, top). Callouts: 1 – lens cap, 2 – screw holes (front and rear), 3 – light source, 4 – Gigabit Ethernet interface, 5 – 12-pin interface, 6 – PWR indicator, 7 – LNK indicator, 8 – ACT indicator, 9 – U1/U2 indicators on the top. See Table 1-1.
Figure 1-2 Appearance (Type II)
Figure description (text version): Technical drawing of the Type II device (larger square lens cap with light source) in the same views. Callouts 1–9 as in Table 1-1.
Figure 1-3 Appearance (Type III)
Figure description (text version): Technical drawing of the Type III device without own light source, with an external lens with adjustment rings mounted. Callouts 1, 2 and 4–9 as in Table 1-1.
Component Description
Table 1-1 Component Description
| No. | Name | Description |
|---|---|---|
| 1 | Lens Cap | It can be replaced with other lens cap. Transparent and polarization lens cap are optional. |
| 2 | Screw Hole | It is used to fix the device to installation position. It is recommended to use M4 screw. |
| 3 | Light Source | It refers to LED lamps providing light for improving code reading effect. Note: • The default color of LED lamps is white. Red, blue and IR are optional. • The quantity of LED lamps may differ by device models. • The light source of type II device supports full polarization, half polarization, and none polarization. • The type III device does not have own light source, and you can use an external light source instead. |
| 4 | Gigabit Ethernet Interface | It refers to gigabit Ethernet interface for transmitting data. The interface is designed with screw threads to tighten connection between the device and cable, and thus avoiding influence caused by vibration. |
| 5 | 12-Pin Interface | It provides power, input/output, and serial port signal. The interface is designed with screw threads to tighten connection between the device and cable, and thus avoiding influence caused by vibration. |
| 6 | PWR Indicator | It is the power indicator. The indicator is solid blue when the device operates normally. |
| 7 | LNK Indicator | It is network connection indicator. The indicator is solid green when the network transmission is normal. |
| 8 | ACT Indicator | It is network transmission indicator. The indicator is flashing yellow when the network transmission is normal. The indicator flashing speed is related with data transmission speed. |
| 9 | U1/U2 Indicator | The device has 2 user indicators, U1 and U2. They are used to indicate whether some functions of the device are normal or not. |
Słowa kluczowe
Hikrobot ID5000, appearance, wygląd, Type I, Type II, Type III, lens cap, screw hole, M4, light source, LED, polarization, Gigabit Ethernet, 12-pin interface, PWR, LNK, ACT, U1, U2


