Bootstrak Skip to main content

1. Appearance

Streszczenie: Wygląd czytnika kodów ID5000 (typ I, typ II z większą osłoną i oświetleniem, typ III bez własnego oświetlenia, z obiektywem C-mount) oraz opis elementów: osłona obiektywu, otwory montażowe, źródło światła, złącze Gigabit Ethernet, złącze 12-pin i wskaźniki PWR, LNK, ACT, U1/U2.
EN: ID5000 code reader appearance (Type I, Type II, Type III without own light source) and component description: lens cap, screw holes, light source, Gigabit Ethernet interface, 12-pin interface and PWR, LNK, ACT, U1/U2 indicators.

Dotyczy: przemysłowy czytnik kodów Hikrobot serii ID5000 (złącze M12 12-pin, Gigabit Ethernet, RS-232; obsługa przez klienta IDMVS)
Źródło: dokumentacja producenta (Hikrobot ID5000 Series Industrial Code Reader User Manual, V2.5.0); tabele i uwagi przepisane z obrazów na tekst; opisy rysunków – opracowanie Multiprojekt

Note: Appearance here is for reference only. Refer to the device’s specification for detailed dimension information.

Device Views

ID5000 Type I appearance with numbered components

Figure 1-1 Appearance (Type I)

Figure description (text version): Technical drawing in four views (front, side, rear, top). Callouts: 1 – lens cap, 2 – screw holes (front and rear), 3 – light source, 4 – Gigabit Ethernet interface, 5 – 12-pin interface, 6 – PWR indicator, 7 – LNK indicator, 8 – ACT indicator, 9 – U1/U2 indicators on the top. See Table 1-1.

ID5000 Type II appearance with numbered components

Figure 1-2 Appearance (Type II)

Figure description (text version): Technical drawing of the Type II device (larger square lens cap with light source) in the same views. Callouts 1–9 as in Table 1-1.

ID5000 Type III appearance (external lens, no own light)

Figure 1-3 Appearance (Type III)

Figure description (text version): Technical drawing of the Type III device without own light source, with an external lens with adjustment rings mounted. Callouts 1, 2 and 4–9 as in Table 1-1.

Component Description

Table 1-1 Component Description

No.NameDescription
1Lens CapIt can be replaced with other lens cap. Transparent and polarization lens cap are optional.
2Screw HoleIt is used to fix the device to installation position. It is recommended to use M4 screw.
3Light SourceIt refers to LED lamps providing light for improving code reading effect.
Note:
• The default color of LED lamps is white. Red, blue and IR are optional.
• The quantity of LED lamps may differ by device models.
• The light source of type II device supports full polarization, half polarization, and none polarization.
• The type III device does not have own light source, and you can use an external light source instead.
4Gigabit Ethernet InterfaceIt refers to gigabit Ethernet interface for transmitting data. The interface is designed with screw threads to tighten connection between the device and cable, and thus avoiding influence caused by vibration.
512-Pin InterfaceIt provides power, input/output, and serial port signal. The interface is designed with screw threads to tighten connection between the device and cable, and thus avoiding influence caused by vibration.
6PWR IndicatorIt is the power indicator. The indicator is solid blue when the device operates normally.
7LNK IndicatorIt is network connection indicator. The indicator is solid green when the network transmission is normal.
8ACT IndicatorIt is network transmission indicator. The indicator is flashing yellow when the network transmission is normal. The indicator flashing speed is related with data transmission speed.
9U1/U2 IndicatorThe device has 2 user indicators, U1 and U2. They are used to indicate whether some functions of the device are normal or not.

Słowa kluczowe

Hikrobot ID5000, appearance, wygląd, Type I, Type II, Type III, lens cap, screw hole, M4, light source, LED, polarization, Gigabit Ethernet, 12-pin interface, PWR, LNK, ACT, U1, U2