Bootstrak Skip to main content

2. Interface and Indicator

Streszczenie: Definicja pinów 12-pinowego złącza M12 czytnika ID5000 (zasilanie, wyjścia OPTO_OUT0–2, wejścia OPTO_IN0–2, wspólne masy, RS-232, kolory przewodów) oraz stany wskaźników PWR, LNK, ACT i U1/U2 przy pracy normalnej i błędach.
EN: ID5000 12-pin M12 interface pin definitions (power, OPTO_OUT0–2 outputs, OPTO_IN0–2 inputs, common grounds, RS-232, wire colours) and PWR, LNK, ACT and U1/U2 indicator status in normal operation and on errors.

Dotyczy: przemysłowy czytnik kodów Hikrobot serii ID5000 (złącze M12 12-pin, Gigabit Ethernet, RS-232; obsługa przez klienta IDMVS)
Źródło: dokumentacja producenta (Hikrobot ID5000 Series Industrial Code Reader User Manual, V2.5.0); tabele i uwagi przepisane z obrazów na tekst; opisy rysunków – opracowanie Multiprojekt

2.1 12-Pin Interface

Read the following section to get definitions of 12-pin interface.

image.png12-pin M12 interface pin numbering

Figure 2-1 12-Pin Interface

image.png

Figure image.pngdescription (text version): Front view of the 12-pin M12 connector with the coding key at the top. Pins 1–9 are arranged around the outer ring (starting at the top right, counter-clockwise), pins 10, 11 and 12 are in the centre.

Table 2-1 Pin Definitions

No.SignalI/O Signal SourceDescriptionColor
1DC-PWR–Direct current power supply positiveWhite
2GND–Power supply groundBrown
3OPTO_OUT0LineOut0 signal lineOpto-isolated output 0Green
4OPTO_OUT1LineOut1 signal lineOpto-isolated output 1Yellow
5OPTO_OUT2LineOut2 signal lineOpto-isolated output 2Gray
6OUT_COMLineOut0/1/2 signal groundCommon-ended outputPink
7OPTO_IN0LineIn0 signal lineOpto-isolated input 0Blue
8OPTO_IN1LineIn1 signal lineOpto-isolated input 1Red
9OPTO_IN2LineIn2 signal lineOpto-isolated input 2Black
10IN_COMLineIn0/1/2 signal groundCommon-ended inputPurple
11RS232_R–RS232 serial port inputGray/Pink
12RS232_T–RS232 serial port outputRed/Blue

Note: You should refer to the table above and the label attached to the power and I/O cable to wire the device.

2.2 Indicator Status

Read the following section to get the indicator status of the device.

image.pngTable 2-2 Description

Device StatusPWR IndicatorLNK IndicatorACT IndicatorU1/U2
Device is powered on.Solid blueSolid greenSlow/fast flashing yellowU1 is unlit, and U2 is slow flashing blue.
Power supply exception.UnlitUnlitUnlitUnlit
Network exception.Solid blueUnlitUnlitU1 is unlit, and U2 is slow flashing blue.
Device software exception.Solid blueSolid greenFlashing yellowU1 and U2 are unlit.
Device exceptionSolid blueSolid greenSolid yellowU1 and U2 are solid blue.

image.pngNote: When the indicators are flashing slowly, their unlit interval is 1 s.

Słowa kluczowe

Hikrobot ID5000, 12-pin, M12, pinout, pin definitions, DC-PWR, GND, OPTO_OUT0, OPTO_OUT1, OPTO_OUT2, OUT_COM, OPTO_IN0, OPTO_IN1, OPTO_IN2, IN_COM, RS232, wire color, indicator status, PWR, LNK, ACT, U1/U2, wskaźniki